Connection Via Nfc; Clearing Paired Devices; Voice Announcement; Connecting The Headphones Through Audio Cable - SilverCrest SBKL 40 A1 Instructions D'utilisation Et Consignes De Sécurité

Connection via NFC

You can simply connect the headphones
with your mobile device by tapping
2 devices together via NFC touchpoint
Please follow below steps to complete the
Bluetooth connection via NFC touchpoint
.
9
1. Turn the headphones and the Bluetooth
function on. The LED
The NFC function is now enabled and
ready for the connection by tapping the
NFC touchpoint
9
2. Enable your mobile device with both
Bluetooth and NFC function powered on.
3. Tap the NFC touchpoint of your mobile
device and the NFC touchpoint
headphones. Your mobile device may
prompt out a message for Bluetooth con-
nection for acceptance.
4. Once the connection between the mobile
device and the headphones is established,
the LED flashes white and then turn OFF.
7
NOTE: This feature requires your mobile
device to support Bluetooth pairing via the
NFC feature. Please refer to your owner's
manual for your mobile device to learn
about this NFC feature.

Clearing paired devices

You can clear up the paired device anytime.
Please press both Vol+ button
Vol– button together at the same time
5
for approx. 5 seconds. The memory in the
headphones is cleared and it will not auto-
connected to the previous paired communi-
cation device.
9
will flash white.
7
of the headphones.
of the
9
and
3

Voice Announcement

This headphone integrated with voice announce-
ment feature that will let you know existing
. product status:
– ANC ON / OFF status
– Bluetooth connection status
– Rechargeable battery capacity level whilst
Power ON
Connecting the headphones
through audio cable
Insert the 3.5 mm jack plug at one end of
audio cable
Insert the 3.5 mm jack plug at other end of
audio cable
your playback device.
When a 3.5 mm cable is plugged into the
3.5 mm jack socket
nection will be disconnected. The ANC
function remains ON.
Start a playlist on your playback device.
You can only adjust the music volume on
the playback device.
Active Noise Cancellation
function (ANC)
In order to filter out unwanted noises from
surrounding you can enable the active noise
cancellation (ANC) function.
Press for approx. 3 seconds the ANC button
to switch the ANC function ON or OFF.
13
Voice control function with
Siri / Google assistant
Please follow below steps to activate the Voice
Control function:
1. First activate Siri or Google assistent on you
mobile device.
to 3.5 mm jack socket
16
to 3.5 mm jack socket of
16
, the Bluetooth con-
11
GB/IE/NI
.
11
11