Dentsply Sirona CEREC AF Notice D'utilisation page 54

7 Operation
7.4 Directing the camera
52
Operating Instructions (valid for Canada) CEREC AF, CEREC AF Connect
Completing the scanning process
1. Start as indicated above, on the occlusal surface of the right terminal
tooth, and scan it occlusally.
Tilt the camera by 45° in a palatinal direction (oral) and guide it from
the distal to the mesial.
2. Tilt the camera another 45° in a palatinal direction (oral) and move it
in a distal direction.
3. Tilt the camera by 90° on to the occlusal surface and move it in a
mesial direction.
4. Tilt the camera in a 45° buccal direction and move it back towards the
distal.
5. Then tilt the camera a further 45° in a buccal direction to a total of 90°
and move it in a mesial direction again.
Dentsply Sirona
66 37 487 D3652
D3652.201.01.14.02 10.2017