Toshiba RAC-WK0512CMRC Instructions D'installation page 14

1. Prepare the Window
Lower sash must open sufficiently to allow a clear vertical opening (see dimension H in Table 1).
Side louvers and the rear of the AC must have clear air space to allow enough airflow through the
condenser for heat removal. The rear of the unit must be outdoors, not inside a building or garage.
Mounting Hardware
Lock Frame
(For Wooden windows)
(2)
3/4'' (or 1/2")
Screws
(7)
2. Prepare Air Conditioner
A: Remove the air conditioner from the carton and place on a fl at surface.
B: Remove top rail from the packaging material as shown in Fig. A.
Top Rail Hardware
3/8" Screws
(4)
Packaging
Page 14
Lock Frame
(For Vynil-Clad windows)
(2)
Weather stripping
10"*3/4"*1/12"
(5)
Top Rail
(1)
Fig. A
Fig. A
Top Rail
Weather stripping is only for
ENERGY STAR models only.
Sash Lock
(1)
Window sash
seal foam
(1)
Top Rail
NOTE
User Manual