Repair Service; Information For Environmental Protection/ Disposal; Spare Parts; Warranty - Oregon AKS 4030 Manuel D'utilisation

• Sparks fly at the motor:
Motor or carbon brushes damaged. Take the chain saw
to a specialised work-shop or the works after-sales
service.
• Oil does not flow:
Check the oil level. Clean the oil flow openings in the
bar. If this is not successful, take the chain saw to a
specialised work-shop or the works after-sales service.
Attention: Any maintenance or repair work go-
ing beyond that described in these Operating
Instructions may only be carried out by author-
ised persons or the works after-sales service.

Repair Service

Repairs to electric power tools should only be carried out
by specialist electrical personnel.
Always keep the original packaging for a possibly re-
quired shipping of the tool.
Information for environmental protection/
disposal
Dispose of the machine properly after it is worn out. Dis-
connect the mains cable in order to prevent misuse. Do
not dispose of the machine with the household waste. In
the interest of environmental protection, take it to a coll-
ection point for electric machines. Your responsible local
authority can provide you with addresses and operating
times. Also take the packaging materials and worn out
accessories to the appropriate collection points.
Only for EU countries
Do not discard electric tools in the household
waste!
In accordance with European Directive 2012/19/EC on
waste electrical and electronic equipment and its im-
plementation in national law, waste electric tools must
be collected separately for environmentally-compatible
re-use.
Recycling alternative to the return invitation:
Instead of returning the electric equipment, the owner is
alternatively obligated to take part in the proper recycling
in the case of relinquishment of ownership. The waste
equipment can also be taken to a collection facility which
disposes of it in the sense of the national recycling ma-
nagement and waste acts. This does not pertain to the
accessory parts and auxiliary equipment without elec-
trical components accompanying the waste equipment.

Spare parts

Chain 30 cm Art.-Nr. 30019451
Bar 30 cm Art.-Nr. 27111573

Warranty

For this electric tool, the company provides the end
user - independently from the retailer's obligations re-
sulting from the purchasing contract - with the following
warranties:
The warranty period is 24 months beginning from the
hand-over of the device which has to be proved by the
original purchasing document. For commercial use and
GB | Operating Instructions
use for rent, the warranty period is reduced to 12 months.
Wearing parts and defects caused by the use of not fitting
accessories, repair with parts that are no original parts of
the manufacturer, use of force, strokes and breaking as
well as mischievous overloading of the motor are exclud-
ed from this warranty. Warranty replacement does only
include defective parts, not complete devices. Warranty
repair shall exclusively be carried out by authorized ser-
vice partners or by the company's customer service. In
the case of any intervention of not authorized personnel,
the warranty will be held void.
All postage or delivery costs as well as any other subse-
quent expenses will be borne by the customer.

EC Declaration of Conformity

We, ikra GmbH, Schlesierstraße 36, 64839 Müns-
ter, Germany, declare under our sole responsibility
that the product Chain saw, battery powered AKS
4030, to which this declaration relates correspond to
the relevant basic safety and health requirements of
Directives 2006/42/EC (Machinery Directive), 2014/30/
EU (EMC-Guideline), 2011/65/EU (RoHS-Guideline) and
2000/14/EC (noise directive) incl. modifications. For
the relevant implementation of the safety and health
requirements mentioned in the Directives, the following
standards and/or technical specification(s) have been
respected:
EN 60745-1:2009 +A11:10; EN 60745-2-13:2009+A1:10
EK9-BE-78 (V1):2014; PAK-Anforderung für GS (PAH
requirement for GS) AfPS GS 2014:01 PAK
EK9-BE-77 (V3):2015; EK9-BE-91:2015
EK9-BE-73 (V5):2014; EK9-BE-57 (V2):2014
EN 55014-1:2006+A1:2009+A2:2011
EN 55014-2:1997+A1:2001+A2:2008; EN 50581:2012
Engineering type licence No.: 15SHW1924-01
Intertek Notified Body 0905
measured
guaranteed sound power level 100,0 dB(A)
Conformity assessment method to annexe V / Directive
2000/14/EC
The year of manufacture is printed on the nameplate and can be additionally
retrieved via the consecutive serial number.
Münster, 21.04.2016
Gerhard Knorr, Technical Management Ikra GmbH
Maintenance of technical documentation:
Gerhard Knorr, Kärcherstraße 57, DE-64839 Münster
9
sound power level 96,5 dB(A)