General Information; Technical Characteristics - Superia 100 Guide D'installation Et D'utilisation

1. General information

Dear user!
When you purchased this Superia 100 wood-burning stove, you chose a modern and innovative combustion
and heating appliance. Our warmest congratulations!
If you wish to achieve maximal performance in terms of ecological and economical considerations, you
should comply with this installation and operation manual and carry out its instructions.
If the wood-burning stove is damaged due to non-compliance with the installation and operation manual, the
guarantee will no longer be valid. Unauthorised modifications of the appliance are not allowed.
Use only replacements part recommended by the manufacturer.
If the wood-burning stove is built in, the applicable laws and local regulations regarding fire prevention and
architecture should be complied with.

2. Technical characteristics

TYPE
Nominal heating capacity
Heating limits
Efficiency
Flue gas temperature at nominale power
Chimneydraft
Draft limits
Percentage of CO at 13%O2
Dimensions of the stove
Height
Width
Depth
Height up to lower edge of connector pipe
Outside diameter of the connector pipe
Weight of the stove
Not packaged
Packed
Fuel
Maximum length of the firewood and wood briquettes
Maximum diameter
Maximum humidity
Charge
Maximum charge
wood
wood briquettes
brown coal briquettes
wood
wood briquettes
brown coal briquettes
Superia 100
kW 9
kW 5 - 14
% 75
% 74
% 69
°C 330
Pa 12
Pa 8 - 20
% 0.18
% 0.16
% 0.07
mm 765
mm 715
mm 570
mm 480
Ø mm 150
about kg 186
about kg 194
Wood
briquettes
brown
briquettes
mm 500
mm 100
% 20
About kg 2
About kg 3
Superia 100 / 92 110 219 01
English
/ wood
/
coal
35