Installing The Multipurpose Blade Or Dough Blade - KitchenAid KFP0921 Mode D'emploi

PRODUCT ASSEMBLY
NOTE: For ease of assembly, install the desired Blade or Disc before attaching the Work
Bowl Cover.
5
To attach the Work Bowl Cover, hook the
Lid Hinge into the Handle Hinge on the
Work Bowl and close the Cover.
NOTE: Your Food Processor will not operate unless the Work Bowl Cover is fully closed
and the Work Bowl is properly seated on the Base.
USING THE REFRIGERATOR LID
1
To attach the Refrigerator Lid, hook the
Lid Hinge into the Handle Hinge on the
Work Bowl and close the Lid.

INSTALLING THE MULTIPURPOSE BLADE OR DOUGH BLADE

1
Place the Blade on the Drive Adapter.
Rotate the Blade so it falls down to the
base of the Adapter.
6
Once the Work Bowl Cover is closed,
push the Lid Hinge down into the locked
position.
2
Once the Refrigerator Lid is closed, push
the lid firmly to ensure closure.
2
Install the Work Bowl Cover, and be sure
the Lid Latch is pushed down to the
locked position.
7