Installing The Multipurpose Blade Or Dough Blade; Installing The Mini-Bowl And Mini-Blade - KitchenAid KFP0935Q Instructions D'utilisation

ASSEMBLING THE FOOD PROCESSOR
Installing the multipur_pose blade or_ dough blade
IMPORTANT: The multipurpose blade and dough blade can only be used with the work bowl.
Place the blade on the power shaft.
1
Rotate the blade so it falls into place on
the power shaft.
Install the work bowl cover, being sure
3
it locks into place.

Installing the mini-bowl and mini-blade

Place the mini-bowl inside the work
1
bowl over the power shaft. Rotate the
mini-bowl until the tabs on the top edge
of the bowl drop into the indents on the
top of the work bowl.
Push to lock: Press down firmly on
2
the blade until it is down as far as it
will go. The multipurpose blade features
an internal seal that fits tightly over the
center of the work bowl.
Insert the disc adapter into the mini-
2
blade, and place on the power shaft. It
may be necessary to rotate the blade
until it falls into place. Press down firmly
to lock it into place.
11