Kärcher SC 4.100 CB Instructions Abrégées page 23

Masquer les pouces Voir aussi pour SC 4.100 CB:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25
Troubleshooting
Often, failures have simple causes and you
can do the troubleshooting yourself using
the following overview. If you are in doubt
or if the failure is not listed here please con-
tact the authorized customer service.
Danger
Always disconnect the mains plug and al-
low the steam cleaner to cool down before
performing any maintenance work.
Repair works may only be performed by the
authorized customer service.
Long heating-up time
Steam boiler is decalcified.
Descale the steam boiler.
No steam
Indicator lamp - "water shortage" blinks
red and signal sounds.
No water in the water reservoir.
Fill the water reservoir up to the "MAX"
marking.
Indicator lamp "water shortage" glows
red.
No water in the steam boiler. Overheating
protection of the pump was triggered.
Turn off the appliance.
Filling the Water Reservoir
Turn on the appliance.
Water reservoir has not been inserted prop-
erly or is calcified.
Remove the water reservoir and rinse it.
Insert the water reservoir and press
downwards until it arrests.
Steam lever cannot be pressed
anymore
Steam switch is secured with the lock /
child-proof lock.
Move the selector switch for the steam
volume to the front.
Steam iron "spits out" water!
Set the thermostat to level •••.
Rinse or decalcify the steam boiler.
After breaks during ironing, water drops
will come out of the steam iron.
During longer breaks from ironing, the
steam in the steam line can condense.
Direct the first burst of steam at a sepa-
rate piece of cloth.
High water output
Steam boiler is decalcified.
Descale the steam boiler.
Spare parts
Use only original KÄRCHER spare parts.
You will find a list of spare parts at the end
of these operating instructions.
The warranty terms published by the rele-
vant sales company are applicable in each
country. We will repair potential failures of
your appliance within the warranty period
free of charge, provided that such failure is
caused by faulty material or defects in man-
ufacturing. In the event of a warranty claim
please contact your dealer or the nearest
authorized Customer Service centre.
Please submit the proof of purchase.
(See address on the reverse)
– 13
EN
Warranty
23

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sc 4.100 c

Table des Matières