Front Wheel Assembly - YT Industries CAPRA RTFM Mode D'emploi

FRONT WHEEL ASSEMBLY

Remove the cardboard packaging of both Remove the front axle stand from the front
6.1 6.2
wheels. wheel axle.
FOX: Unscrew and remove the quick release ROCKSHOX: Unscrew and remove the axle
6.4.1 6.4.2
axle from the fork. from the fork.
1 2 y t
P RE PARI NG
Pull the spacer out of the brake caliper. Please
6.3
keep it for future bike transports.
Insert the front wheel in the fork dropouts.
6.5
Make sure the brake rotor is centered in the
brake caliper to avoid damages.
FRONT WHEEL ASSEMBLY
FOX
Insert the slightly lubed quick release axle Insert the slightly lubed axle into the fork
7.1.1 7.2.1
into the fork from the drive side until the very from the drive side until the very end.
end and tighten it clockwise afterwards.
Close the quick release lever to ensure the
7.1.2 7.2.2 Use the 6mm Allen key to tighten the axle
tight fit of the front wheel. Do not use any with 9 – 13.5 Nm clockwise afterwards.
tools to increase the leverage, close it firmly Please read the manufacturer's manual.
by hand. The mechanism comes preadjust-
ed: Once you close the lever so it is pointed
alongside the fork stanchions the wheel is
secured. Please read the manufacturer's
manual.
R OCKS HOX
Airsprung forks
and shocks have
to be filled with
the correct air
pressure before
use! That's why we
have included a
shock pump to your
package: Please
read the manufac-
turer manuals to
learn how it works.
y t 1 3