Rear Wheel Assembly - YT Industries CAPRA RTFM Mode D'emploi

REAR WHEEL ASSEMBLY

Remove the cardboard packaging of both
4.1
wheels.
Open the rear derailleur cage and activate the Pull the spacer out of the rear brake caliper.
4.3 4.4
CAGE LOCK by pressing the small button with Please keep it for future bike transports.
the lock symbol on it.
1 0 y t
P RE PARI NG
Remove the frame cover from the main frame.
4.2
Unscrew the rear wheel axle from the frame
and remove the axle´s transport protection.
Unscrew the rear wheel axle from the frame and
4.5
remove the axle's transport protection.
REAR WHEEL ASSEMBLY
Place the rear wheel in the frame. Make sure Insert the axle to the very end and tighten it
5.1 5.2
clockwise afterwards.
to place the chain on the smallest cog of the
cassette. Carefully pull the shifter rearwards
to make the insertion easier.
Press the derailleur cage forwards to release
5.4
the CAGE LOCK. Once released, carefully
guide the cage rearwards until it puts tension
on the chain.
Tighten the rear axle firmly by hand with
5.3
around 15 – 20 Nm torque.
P l ea se f ol l ow t h e
t o rq u e sp e c i fi c at i on s of
t h e m a n u fac t u rer s:
Rear wheel axle // 15 – 20 Nm
y t 1 1