Connecting An Audio Device; Handsfree Calling; Making Calls - Sony MEX-BTS5700U Mode D'emploi

Connecting an audio device

1
Be sure that both this unit and the
audio device are switched to
Bluetooth signal on.
2
Connect to this unit using the audio
device.
" " appears when the connection is made.
Connecting to registered devices
1
Press (BT).
The Bluetooth settings menu appears.
2
Rotate the control dial to select
"Device List," then press the select
button.
The list of registered devices appears.
3
Select the device to connect.
4
Select "Audio Connect."
"Connection Complete" appears and
connection is complete.
" " appears during connection.
Connecting the last-connected audio
device from this unit
Press (6) with the "Bluetooth Audio" source
selected.
To stop the connection
Select "Audio Disconnect" in step 4.
Deleting the registration of a
connected device
Select "Delete" in step 4.

Handsfree calling

Check that the unit and cellular phone are
connected beforehand.

Making calls

You can make a call from the connected cellular
phone by operating this unit.
You can call from the phonebook in a cellular
phone via this unit (page 27).
1
Press (SOURCE) repeatedly until
"Bluetooth Phone" appears.
2
Press (handsfree).
The CALL menu appears.
3
Rotate the control dial until the
desired menu item appears, then
press the select button.
Depending on the setting, by rotating the
control dial again, other items can be set.
Call menu
Phonebook* 1
Selects from the phonebook list in the unit
(page 27) (Maximum storable contacts: 300).
Recent Call* 1
Selects from the dialed / received call history.
(Maximum storable name and phone
numbers:20)
Select "Delete" to delete the name and phone
number, "Delete All" to clear the history.
Dial
Inputs the phone number using the control dial
or card remote commander.
Receive PB*
1 * 2 (Receive Phonebook)
Receives and stores the phonebook data from a
cellular phone (page 27).
Security
Locks the personal information by setting a
4-digit password.
If you set the security, "Security Code" appears
when the above menus are operated.
To unlock the security, input the password. You
can operate this unit without input password
until it is turned off.
*1 If "Security" is set, "Security Code" appears and
operation is not possible.
*2 If a character that cannot be displayed on this unit
is used, it is not displayed correctly.
Calling from the phonebook in the
unit
1 Rotate the control dial to select "Phonebook,"
then press the select button.
2 Select an initial from the initial list.
3 Select a name from the name list.
4 Select a phone number from the number list.
5 Select "Call."
continue to next page t
25