Lenze Global Drive Instructions De Montage page 33

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

(
Stop!
Heavy device weight
The device is very heavy and must be lifted for the mounting.
Possible consequences:
ƒ
ƒ
Protective measures:
ƒ
ƒ
ƒ
O
Warnings!
Conditions of Acceptability:
ƒ
ƒ
ƒ
EDKZN3B045 DE/EN/FR 3.0
Injury to persons, particularly backache when lifting and holding
the device, respectively
Injury to persons and damage to material assets due to the
device falling down
The device must only be carried with a load bearing system such
as an indoor crane permitted for the device weight
Before the transport, the hoist, the load bearing system and
lifting accessories must be checked for sufficient payload and
faultless status
Do not remove the hoist and the lifting accessories until the
device lies safe on a stable surface or is finally mounted.
The filter EZN3A0120H012, EZN3A0088H024 and
EZN3A0055H045U shall be mounted into an enclosure providing
adequate spacings.
The terminals have not been evaluated for field wiring
connection.
These devices are only intended to be used with this
manufacturer's inverters type EMB... having a controlled
overvoltage means as shown below:
– EZN3A0120H012 ® EMB9341−E
– EZN3A0088H024 ® EMB9342−E
– EZN3A0055H045U ® EMB9343−E
l
Safety instructions
Residual hazards
1
33

Publicité

Table des Matières
loading

Table des Matières