Measuring Your Blood Pressure; Irregular Heartbeat Detection - BIOS Diagnostics PREMIUM Manuel D'instructions

3.4 Measuring Your Blood Pressure

1. Press the button to turn on the device and start measurement. The LCD screen is
START
STOP
turned on. The cuff begins to inflate while the increasing cuff pressure is displayed
M
on the screen. After the suitable inflation pressure is reached, the cuff stops inflating
and the pressure gradually falls. The screen will show the
detected. When the pulse signal becomes strong, the
Three short beeps sound when the measurement is completed. The systolic and
diastolic blood pressure values along with the pulse rate are displayed on the screen.
The measurement is displayed for approximately 1.5 minutes.
2. The device will switch off after 1.5 minutes when no button is pressed.
When the measurement is taken between 4am and 12pm the "sun" icon will be
displayed

3.5 Irregular Heartbeat Detection

When the device detects an irregular heartbeat, or any excessive body movement
during the measurement, the
measurement is displayed. It is important that you be relaxed, remain still and do not talk
during measurement. If the
may be an indication of a more serious heart problem, and you should consult your doctor.
3.6
The bars on the left hand side of the display show you the range within which the indicated blood pressure
values lies. Depending on the height of the bar, the readout value is either within the normal (green), borderline
(yellow/orange) or danger (red) range.
The classification is based on standards adopted from WHO (World Health Organization); which is recognized
by Hypertension Canada.
The indicator bar rises according to your measurement.
according to the WHO classification.
classification.
SYS
(mmHg)
180
Red
160-180
Red
Orange 140-160
130-140
Yellow
Green 120-130
120
Green
WHO
World Health Organization 2003
All manuals and user guides at all-guides.com
symbol will appear and flash when the blood pressure
symbol appears frequently (e.g. several times a week), it
DIA
110
100-110
90-100
85-90
80-85
80
icon once a pulse is
icon will begin to flash.
PUL
START
M
STOP
PUL