Sony HT-CT260 Mode D'emploi page 27

HT-CT260/HT-CT260HP - HTCT260_CT260HP__EN_FR_ES.pdf
Pairing this system with
a B l u e t o o t h device
manually
If you intend to connect a second and
following pieces of Bluetooth
equipment, manual pairing is necessary.
TV VOL TV CH
PAIRING
(Bluetooth)
1
Place the Bluetooth device to be
connected to this system within
1 meter of the system.
27 of 130
2
Push PAIRING on the remote
control or touch (Bluetooth)
on the Sound Bar for more than
two seconds.
3
Perform steps 3 to 6 in "Pairing
automatically" (page 25).
Notes
• "Passkey" may be called "Passcode," "PIN
code," "PIN number" or "Password," etc.,
depending on the device.
• The pairing standby status of the system is
canceled after about 5 minutes. If pairing is
not successful, redo the procedure from step
INPUT
+/ 1.
• If you wish to pair with several Bluetooth
devices, perform the procedure from steps 1
to 3 individually for each Bluetooth device.
• If no pairing information is stored in the
system, the system automatically enters
pairing mode when "BT AU" is selected as
input. In this case, pairing mode is not
VOL
+/ released automatically.
Listening to music with
the B l u e t o o t h connection
The system supports SCMS-T content
protection. You can listen to a Bluetooth
device that supports SCMS-T content
protection.
Before starting music playback, check
VOL +/
the following:
• The Bluetooth function on the
Bluetooth device is on.
• The pairing procedure is completed on
both this system and Bluetooth device.
1
Press INPUT +/– to select "BT
AU" on this system.
http://www.docs.sony.com/release/HTCT260_CT260HP__EN_FR_...
continued
27
US
3/24/13 8:44 PM