Environment Concerns; Packaging Material - AEG HK954400FB Notice D'utilisation

28

Environment concerns

Problem
and number come on.
comes on
There is no signal when you
touch panel keys
If you tried the above solutions and cannot repair the problem, speak to your dealer or
the Customer Care Department. Give the data from the rating plate, three-digit-letter
code for the glass ceramic (it is in the corner of the cooking surface) and an error mes-
sage that comes on.
If you operated the appliance incorrectly, the servicing by a customer service technician
or dealer will not be free of charge, even during the warranty period. The instructions
about the customer service and conditions of guarantee are in the guarantee booklet.
ENVIRONMENT CONCERNS
The symbol
be treated as household waste. Instead it should be taken to the appropriate collection
point for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed information about recycling of this
product, please contact your local council, your household waste disposal service or the
shop where you purchased the product.

Packaging material

The packaging materials are friendly to the environment and can be recycled. The plastic
components are identified by marking: >PE<,>PS<, etc. Discard the packaging materials
as household waste at the waste disposal facilities in your municipality.
There is an error in the appliance.
Disconnect the appliance from the electrical supply for some
time. Disconnect the fuse from the electrical system of the
house. Connect again. If
sales service.
There is an error in the appliance, because a cookware boils dry
or you use not correct cookware. Overheating protection for
the cooking zone operates. The automatic switch-off operates.
Switch off the appliance. Remove the hot cookware. After ap-
proximately 30 seconds switch on the cooking zone
again.
Cool down the cookware and check it with the section Cook-
ware for the induction cooking zone.
The signals are off.
Switch on the signals.
on the product or on its packaging indicates that this product may not
Possible cause and remedy
comes on again, speak to the after
should disappear, residual heat indicator can stay.