Automatic Fi Lter Cleaning; Changing Fi Lters - Festool SRM 45 E-LHS 225 PLANEX Notice D'utilisation D'origine/Liste De Pièces De Rechange

eter of the connected suction hose:
Set the correct hose diameter.
- Suction hose clogged or kinked:
Eliminate blockage or kink.
- Disposal/Filter bag full:
Change the disposal/fi lter bag.
- Filter element clogged:
Clean the fi lter element or replace if damaged
or heavily clogged.
9.2 Automatic fi lter cleaning
To maintain a constant suction power, the fi lter
element is cleaned automatically every 30 seconds
during operation.
We recommend cleaning the fi lter element com-
pletely if severely clogged:
After extracting with a disposal bag:
• Set the suction power control to the maximum
setting.
• Cover the end of the nozzle or suction hose with
your hand for 10 seconds.
NOTE
In intensive applications that generate adherent
dust, it may be necessary to clean the fi lter ele-
ment mechanically under certain circumstances
(extract). Wear a dust mask!
9.3 Changing fi lters
CAUTION
Hazardous dust!
- Do not generate clouds of dust unnecessarily.
- Always wear a P2 dust mask when working
with hazardous dust.
Changing the disposal bag
• Clean the fi lter element before changing the
disposal bag (Chap. 9.2).
• Remove the top section [Fig. 2].
• Pull the fi lter bag socket [5-2] carefully from the
intake opening [5-1].
• Close off the fi lter bag socket with the slide piece
[5-3].
• Close the disposal bag using the cord provided.
• Insert a new disposal bag [Fig. 3] in the clean
container.
• Dispose of the used bag in accordance with statu-
tory regulations.
Changing the fi lter bag
• Remove the top section [Fig. 2].
• Pull the fi lter bag socket [5-2] carefully from the
extractor opening [5-1].
• Close off the fi lter bag socket with the slide piece
[5-3].
All manuals and user guides at all-guides.com
• Insert a new fi lter bag [Fig. 4].
• Dispose of the used bag in accordance with statu-
Changing the fi lter element
• Remove the top section [Fig. 2].
• Pull the fi lter element upwards to remove [Fig.
• Open the stirrup handle [6-3] and remove the
• Remove the fi lter retaining disc [6-1].
• Remove the fi lter element.
• Insert a new fi lter element.
• Place the fi lter retaining disc in position.
• Replace the stirrup and secure the stirrup handle.
• Dispose of the used fi lter element in accordance
9.4
• Remove the top section [Fig. 2].
• Empty the extracted material.
• Clean the edge of the container and replace the
• Clean the intake opening and the hose sleeve.
• Dispose of the extracted material in accordance
10
Use only original Festool accessories and Festool
consumable material intended for this machine
because these components are designed specifi -
cally for the machine. Using accessories and con-
sumable material from other suppliers will most
likely affect the quality of your working results and
limit any warranty claims. Machine wear or your
own personal workload may increase depending on
the application. Protect yourself and your machine,
and preserve your warranty claims by always using
original Festool accessories and Festool consum-
able material!
11
Do not throw the power tool in your household
waste! Dispose of the machine, accessories and
packaging at an environmentally-responsible
recycling centre! Observe the valid national regu-
lations.
EU only: European Directive 2002/96/EC stipulates
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
16
tory regulations.
Never operate the machine without a fi lter ele-
ment as this may damage the motor.
6].
stirrup section.
Clean the fi lter seal and fi ll level tube [6-2].
with statutory regulations.
Emptying the dust container
top section of the extractor.
with statutory regulations.
Accessories
Disposal