Toshiba RAV-SM562CT-E Manuel D'installation page 21

7
TROUBLESHOOTING
Confirmation and check
When a trouble occurred in the air conditioner, the
check code and the indoor unit No. appear on the
display part of the remote controller.
The check code is only displayed during the operation.
If the display disappears, operate the air conditioner
according to the following "Confirmation of error
history" for confirmation.
Confirmation of error history
When a trouble occurred on the air conditioner, the
trouble history can be confirmed with the following
procedure. (The trouble history is stored in memory up
to 4 troubles.)
The history can be confirmed from both operating
status and stop status.
Procedure
When pushing
more, the following display appears.
If [Service check] is displayed, the mode enters in the trouble history
mode.
1
• [01 : Order of trouble history] is displayed in CODE No. window.
• [Check code] is displayed in CHECK window.
• [Indoor unit address in which an error occurred] is displayed in
UNIT No.
Every pushing of [
displayed in order.
The numbers in CODE No. indicate CODE No. [01] (latest) → [04] (oldest).
2
REQUIREMENT
CL
Do not push
3
After confirmation, push
1. Check the troubles according to the above procedure.
2. Ask an authorized dealer or qualified service (maintenance) professional to repair or maintain the air conditioner.
3. More details of the service code are explained in Service Manual.
All manuals and user guides at all-guides.com
SET
TEST
and buttons at the same time for 4 seconds or
, ] button used to set temperature, the trouble history stored in memory is
button because all the trouble history of the indoor unit will be deleted.
TEST
button to return to the usual display.
Check code
TEMP.
2
TIMER SET
TIME
FILTER
RESET TEST SET CL
3
Description
18
CODE No.
UNIT No.
R.C. No.
Indoor unit No. in which
an error occurred
ON / OFF
FAN MODE
SWING/FIX VENT
UNIT
1
CODE No.
UNIT No.
R.C. No.