Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Basic Operations
1
Turn on the power
2
Select the source
SOURCE
• DAB: Without connecting the DAB tuner,
you cannot select DAB.
• CD: If a disc is not in the loading slot, you
cannot select CD as the source to play.
• CD-CH: Without connecting the CD
changer, you cannot select CD-CH (CD
changer).
• LINE-IN: Select the external component
(see page 49).
3
Adjust the volume
8
The Operation screen for last
selected source is recalled.
TUNER
DAB
LINE-IN
CD-CH
4
Select the DSP mode and
sound mode as you want.
• For details, see pages 26 to 31.
CD
To drop the volume in a moment (ATT):
To turn off the power:
Hold
CAUTION on Volume Setting:
Discs produce very little noise compared
with other sources. If the volume level is
adjusted for the tuner, for example, the
speakers may be damaged by the sudden
increase in the output level. Therefore,
lower the volume before playing a disc
and adjust it as required during playback.
To restore the sound,
press it again.
Publicité
Table des Matières
