Radio Operations - JVC EXAD KD-SHX701 Manuel D'instructions

Radio Operations

○ ○ ○ ○ ○ ○ ○ ○
Listening to the radio
1
Select the Tuner
SOURCE
2
Select the band (FM/AM)
OK FM1
BAND
AM
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
What information is shown on the display
The following information are shown commonly for tuner operations.
• If you press DISP on the control panel, the display will show the different information or
different screens (see page 14).
Current band
Station name (PS: see page 15)
(with its icon)
3
"Auto Search" begins.
When a station is received, searching stops.
To stop searching, press the same button.
To tune in to a station manually
In step 3 above...
FM2
Hold
FM3
Activate "Manual
Search."
Preset number if any
see page 12.
Start searching for a station
Hold
then
Station Frequency
(with its icon)
Programme Type
(PTY code: see page 20)
Select station
frequencies.
11