Cleaning And Storage; Emptying The Dust Bin And Cleaning The Fi Lter - DS Produkte PC-P002 Mode D'emploi

Cleaning and storage

ATTENTION!
❐ Ensure that the device has been deactivated before you clean it!
❐ Never submerge the motor casing or the charger in water or other liquids.
❐ The device may not be connected with the charger when cleaning the dust bin.
❐ Never use soap or other cleaners to clean the dust fi lter. Otherwise this would dam-
age the fi lter.
❐ Do not use any corrosive or abrasive cleaners to clean the housing. They could dam-
age the surface. If needed, clean the housing with a damp, soft cloth.
Emptying the dust bin and cleaning the fi lter
1. Hold the device by the handle, preferably in a level position.
6. Allow all parts to dry completely before assembling them. ATTENTION: Do not in
any case insert the fi lter if it is still wet. Assembly is performed in reverse order.
01087_DE-GB-FR-NL_V3.indb 19 01087_DE-GB-FR-NL_V3.indb 19
All manuals and user guides at all-guides.com
2. Push the release button and pull off the dust bin.
3. Pull the dust fi lter and its bracket out of the dust bin.
4. Empty the contents of the dust bin into a waste bin. Tap
out the fi lter over a waste bin.
5. If necessary, clean the dust bin and fi lter with clean, luke-
warm water. Pulling the dust bin releases it from its brack-
et.
19
28.01.2014 15:45:07 28.01.2014 15:45:07