Operation; Cleaning And Storage; Emptying The Dust Container - DS Produkte CBL-CV1703 Mode D'emploi

EN

Operation

PLEASE NOTE!
■ Ensure that there are no larger and/or sharp objects on the surface which is to be
cleaned.
■ Note the MAX marking on the dust container. If during use the marking is reached,
empty the dust container. Empty and clean the dust container after each use. The
HEPA fi lter must also be regularly cleaned in order to prevent overloading of the
motor.
1. Attach the nozzle you want on the extension tube or directly on the suction opening
(see the "Assembly" chapter – "Attaching / Removing the Extension Tube" and "At-
taching / Removing Nozzles").
2. Insert the mains plug into an easily accessible plug socket.
3. Press the On / Off switch (3) to switch on the device. The device will start vacuum
cleaning.
4. Move the nozzle over the surface to be cleaned.
5. After vacuuming, switch off the device by pressing the On / Off switch.
6. Remove the mains plug from the plug socket.
7. To ensure optimum performance of the device, empty the dust container after every
use.

Cleaning and Storage

PLEASE NOTE!
■ Do not immerse the HEPA fi lter in water or rinse it under running water to prevent
damage to the fi lter. It is neither machine-washable, dishwasher-safe nor suitable for
tumble drying.
■ Accessories that are cleaned with water must be completely dry when they are insert-
ed back into the device!
■ Do not use any sharp or abrasive cleaning agents to clean the housing. They could
damage the surfaces.
The HEPA fi lter may lose some of its colour over time. This is normal and does
not have any adverse effect on function.

Emptying the Dust Container

1. Remove the dust container (6) from the main unit (5) (see the "Assembly" chapter –
"Removing / Inserting the Dust Container").
2. Empty the dust container into a dustbin.
3. Wipe it out with a damp cloth if necessary or rinse it with clear water and mild deter-
gent if required.
4. Insert the dry dust container into the main unit (see the "Assembly" chapter – "Re-
moving / Inserting the Dust Container").
18