Items Supplied - DS Produkte CBL-CV1703 Mode D'emploi

■ The device must be switched off when inserting or removing the mains plug. When
you pull it out of the socket, always pull on the mains plug and never the mains cable!
■ Make sure that the mains cable is not squashed, bent or laid over sharp edges and
does not come into contact with hot surfaces. Do not wrap the mains cable around
the device (danger of the cable breaking).
■ The device should only be used if it has been completely and correctly assembled!
The dust container and the HEPA fi lter must be inserted and must not be
damaged! If dirt were to get inside the motor unit, this could damage the motor.
■ Protect the device from heat, naked fl ames, sub-zero temperatures, persistent mois-
ture, wet conditions and impacts.
■ Use only original spare parts from the manufacturer in order to guarantee that there
is no interference that may prevent the device from working and to avoid damage.
■ Do not place or lay any heavy objects on the connecting cable.

Items Supplied

• 1 x main unit
• 1 x dust container
• 1 x HEPA fi lter
• 2 x extension tubes
• 1 x fl oor nozzle
• 1 x combi nozzle
• 1 x instruction manual
Check the items supplied for completeness and transport damage. If you fi nd any dam-
age to the components, do not use them (!), but contact our customer service depart-
ment.
15 EN