Menu Command - Festo SFC-DC IO Serie Instructions D'utilisation

Menu
command
Position set
Password edit
1)
HMI control
LCD adjustment
1)
If necessary password protection
2)
Control interface must be deactivated, see [HMI control]:HMI=on
3)
Teach mode
Festo P.BE−K−SFC−DC−IO 0503NH English
Description
Position no. Number of the position set (1...31)
Pos set mode Set status: absolute or relative positioning
3)
Position Target position of the position set
Velocity Positioning speed of the position set
Acceleration Acceleration for the position set
Deceleration Braking acceleration of the position set
SAVE... Save parameters in EEPROM
Set up a local password with 3 figures for the control panel
Preset the device control via the control panel
Rotate the display in steps of 180°
25