Unpacking And Repacking - Chauvin Arnoux Multimetrix CM 605 Notice De Fonctionnement


Improper use of the instrument or its use with incompatible
equipment.

Modification of the instrument without express authorisation from
the manufacturer's technical departments.

Any work being performed on the instrument by anyone not formally
approved by the manufacturer.

Any adaptation for any particular application not provided for in the
instrument's definition or the operating instructions.

An impact, a fall or drenching in water.

Information and contact details for our After-Sales Services: contact
your distributor.

3. UNPACKING AND REPACKING

All the equipment has been checked mechanically and electrically before
dispatch. However, you are advised quickly to check for any damage
during transport. Should this be the case, inform the freight forwarder
immediately of your reservations. If you are sending anything back, please
use the original packaging and attach a note indicating the reason for the
return.
4.1 METROLOGICAL CHECKS
Like all measuring or testing devices, the instrument must be checked
regularly.
This instrument should be checked at least once a year. For checking and
calibration, contact one of our accredited metrology laboratories
(information and contact details available on request), at our Chauvin
Arnoux subsidiary or the branch in your country.
4.2 REPAIR
For all repairs before or after expiry of warranty, please return the device
to your distributor.
Remove the battery or batteries and store them separately if your
measuring instrument will not be used for more than 60 days.
4. MAINTENANCE
5. STORAGE
12