Application Guidelines; Scope Of Delivery; Warranty - Burkert 0250 Manuel D'utilisation

application Guidelines

the modular 2 and 3-way motorized regulating valve of type 0250 is preferably used
as a control element for hot water or coolant circuits in buses, goods vehicles, floating
and rail vehicles, as well as in machine tool construction. the configuration that is
required for your special application will be drawn up by our Field service employees.
only use the type 0250 modular 2 and 3-way motor control valve for the applications
agreed with the Bürkert company. any other use will have to be agreed with the
customer service of the Bürkert company.

scope of delivery

check immediately upon receipt of the delivery that the contents are not damaged
and that the type and scope agree with the delivery note and packing list.
Germany
contact address:
Bürkert Fluid control systems
sales center
chr.-Bürkert-str. 13-17
d-74653 ingelfingen
tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
e-mail: info@de.buerkert.com
international
contact addresses can be found on the final pages of the printed operating
instructions.
and also on the internet at:
www.burkert.com → Bürkert → company → locations

Warranty

this document contains no promise or guarantee. please refer to our general terms of
sales and delivery. the warranty is only valid if the device is used as intended in
accordance with the specified application conditions.
attentIon!
6 - 0250
the warranty only extends to the freedom from faults of the motor
control valve and its components.
no liability will be accepted for consequential damage of any kind
that may arise from failure or malfunctioning of the device.