Bosch EXACT 2 Notice Originale page 24

All manuals and user guides at all-guides.com
OBJ_BUCH-529-001.book Page 24 Wednesday, December 5, 2007 12:18 PM
24 | English
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted sound pressure level of
the product is 70 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed
80 dB(A).
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Screwdriving without impact: Vibration emis-
2
sion value a <2,5 m/s , Uncertainty
h
2
K =1,5 m/s .
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Declaration of Conformity
We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until Dec. 28, 2009),
2006/42/EC (from Dec. 29, 2009 on).
3 609 929 B57 | (5.12.07)
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider Dr. Eckerhard Strötgen
Senior Vice President Head of Product
Engineering Certification
28.09.2007, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Assembly
Delivery Scope
Type 0 602 490 431/... 433/... 435/... 437/
... 439/... 441/... 443/... 445/
... 447/... 469
The centre grip screwdriver are supplied with-
out application tools, Ni-Cd battery pack, charg-
er, constant voltage regulator or voltage adapt-
er. The voltage adapters are to be used
exclusively for connection of Bosch centre grip
screwdrivers to the 4EXACT constant voltage
regulator.
Type 0 602 492 431/... 433/... 435/... 439/
... 441/... 443/... 445
Industrial cordless screwdrivers are supplied
without application tools, Ni-Cd battery and
charger. These power tools are not suitable for
operation with constant voltage regulator.
Operating and Storage Environment
The device is suitable exclusively for oper-
ation at enclosed work sites. For trouble-
free operation of the device, the allowed
ambient temperature should lie between – 5 °C
and +50 °C (23 °F and 122 °F) at an allowed
relative humidity of between 20 and 95 %, free
of dew.
In order to avoid damage to the battery cells,
the battery pack should be stored within a tem-
perature range between 0 °C (32 °F) and 45 °C
(113 °F).
Bosch Power Tools