CARLO GAVAZZI WM50 Serie Manuel D'instructions page 6

Main unit LED status
G1 Alarm 1, 2, 3, 4
status
G2 Alarm 5, 6, 7, 8
status
G3 Alarm 9, 10, 11, 12
status
G4 Alarm 13, 14, 15,
16 status
BCM TCD12 monitoring
status
Back Power supply
status
Note: for problem solutions, "Troubleshooting" on page 36.
Accessory modules
Part
A Detachable terminal block for inputs/outputs or area specific to communication ports
B Fastening pins to main unit or other accessory module
C Internal local bus port for communications with main unit or other accessory module
D External local bus port for communication with communication module. Not included in communication modules.
Off: no active alarm.
On: at least one active alarm.
Note
: to identify which alarm is activated, use UCS.
All blinking: TCD12 configuration inconsistent with set electrical system.
Note:
for details on the type of inconsistency, see the Warning page in
Off: TCD12 monitoring on.
On: TCD12 monitoring not working.
Blinking: communication error with at least one TCD12 or at least one TCD12 not configured or
inconsistent with the set configuration.
On: WM50 power on.
Off: WM50 power off.
Description
WM50 - Instruction manual | 26/04/2022 | CARLO GAVAZZI Controls SpA
WM50 and TCD12
"Settings menu" on page 16
.
5