Maintenance And Configuration; Using The Auxiliary Input - SORHEA KAPIRIS III Notice D'installation

SORHEA
Note: When using the network, the intrusion and anti-masking alarm relays can be deactivated by
checking "Activation relay outputs." The alarm relays for intrusion and anti-masking are set by
default to alarm.
The alarm and anti-
masking relays are
deactivated
The alarm and anti-masking relays are forced to alarm status.
9

MAINTENANCE AND CONFIGURATION

9.1 Using the auxiliary input

Using the auxiliary input allows activation of two functions each independent of the other.
4. External Alarm function
Allows rerouting an alarm switch from another system on the MAXIBUS III network via KAPIRIS III.
An alarm is generated on the KAPIRIS III intrusion relay and an event is entered in the log.
Activate this function by clicking "External alarm input" on the view web page, then select "Send."
Activation of the
"External alarm
input" function
- 49 -
KAPIRIS III