Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SORHEA
3.2) Adjusting MW
Turn switch 1 to the ON position to enter adjustment mode.
Deactivate PIR by checking "Deactivate PIR sensor," then select ("Send").
Note: the MW sensor is reactivated when deactivation of the PIR sensor is selected.
Deactivation of PIR
Send
Conduct passages in front of the sensor so as to trigger an alarm.
An alarm is triggered when the red LED is lit constantly accompanied by a long, continual beep.
Audio and visual indicator
No beeping
Red LED not lit
Slow blinking
Red LED blinks slowly
Continual beeping
Red LED lit continually
Switches 1 and 2 are ON
Detection status
No detection
Detection of subject by MW
sensor
Alarm
- 45 -
KAPIRIS III
Publicité
Chapitres
Table des Matières
