Rechargeable Battery; Inserting The Battery - Bosch GWS Professional 18V-15 C Notice Originale

Masquer les pouces Voir aussi pour GWS Professional 18V-15 C:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 40
GWS 18V-15 SC
GWS 18V-15 PSC
(125 mm)
Number of speed settings
6
The specified speed setting values depend on the rechargeable battery in use, the battery's state of charge and the tool's operating temperature.
GWS 18V-15 SC
(150 mm)
Number of speed settings
2
3
4
5
6
The specified speed setting values depend on the rechargeable battery in use, the battery's state of charge and the tool's operating temperature.
You can use the button for speed preselection (39) to preselect the required speed, even during operation. The information in
the table below describes the recommended values for the default settings with 3 preset speed levels.
Material
Application
Metal
Removing paint
Metal
Brushing, removing
rust
Stainless
Grinding
steel
Metal
Rough grinding
Metal
Cutting
Stone
Cutting
The rated speed of the accessory must be at least
u
equal to the maximum speed marked on the power
tool. Accessories running faster than their rated speed
can break and fly apart.

Rechargeable battery

Bosch sells some cordless power tools without a re-
chargeable battery. You can tell whether a rechargeable bat-
tery is included with the power tool by looking at the pack-
aging.
Charging the battery
Use only the chargers listed in the technical data. Only
u
these chargers are matched to the lithium-ion battery of
your power tool.
Note: Lithium-ion rechargeable batteries are supplied par-
tially charged according to international transport regula-
Bosch Power Tools
Basic speed setting at level
1
2
-1
-1
[min
]
[min
]
3400
4600
Basic speed setting at level
1
2
-1
-1
[min
]
[min
]
2600
7400
2600
5000
2600
4200
2600
3800
2600
3600
Application tool
Speed preselection
level
Sanding sheet
1
Cup brush, abrasive
1
disc
Grinding disc/fibre
2
disc
Grinding disc
3
Cutting disc
3
Diamond cutting disc 3
tions. To ensure full rechargeable battery capacity, fully
charge the rechargeable battery before using your tool for
the first time.

Inserting the Battery

Push the charged battery into the battery holder until it
clicks into place.
Removing the Battery
To remove the rechargeable battery, press the battery re-
lease button and pull the battery out. Do not use force to do
this.
The rechargeable battery has two locking levels to prevent
the battery from falling out if the battery release button is
pressed unintentionally. The rechargeable battery is held in
place by a spring when fitted in the power tool.
3
4
5
-1
-1
[min
]
[min
]
[min
6000
7200
8600
3
4
5
-1
-1
[min
]
[min
]
[min
7400
5800
7400
5000
6200
7400
4600
5400
6400
GWS 18V-15 SC
GWS 18V-15 PSC
(125 mm)
-1
[min
]
3400
3400
6600
max.
max.
max.
1 609 92A 6WP | (08.06.2022)
English | 33
6
-1
-1
]
[min
]
9800
6
-1
-1
]
[min
]
7400
GWS 18V-15 SC
(150 mm)
-1
[min
]
2600
2600
5000
max.
max.
max.

Publicité

Table des Matières
loading

Table des Matières