Powerlink Connection - Lenze POWERLINK EMF2191IB Instructions De Montage

6 Electrical installation

POWERLINK connection

POWERLINK connection
You can use a standard Ethernet patch cable for connecting the communication module to
the fieldbus (see "Ethernet cable specifications" (^ 33)).
)
Note!
Plug/remove the Ethernet cable plug in a straight manner (at right angles)
into/from the socket to make sure that the RJ45 socket will not be damaged.
Pin assignment
RJ45 socket
I
Tip!
The POWERLINK interfaces feature an auto MDIX function. This function
adjusts the polarity of the RJ45 interfaces so that a connection is established
irrespective of the polarity of the opposite POWERLINK interface, and
irrespective of the type of cable used (standard patch cable or crossover cable).
32
PIN
1
2
3
4
5
6
7
E94AYCXX004C 8
l
Signal
Tx +
Tx −
Rx +
−
−
Rx −
−
−
EDK2191DB DE/EN/FR 2.0