Honeywell IAQPoint Manuel D'utilisateur page 25

All manuals and user guides at all-guides.com
Setting the Device Address
When the unit is configured with Modbus communication, the default
address for the device is 1. If the IAQPoint is equipped with the network
option, the Set Address menu lets you specify an address (between 1
and 247) for the device.
Scroll to the Set Address menu option and press Enter to select.
In the Set Address screen, use the Up or Down buttons to change the
address. Press Enter to confirm the address value.
The screen returns to the main menu option.
Setting the BACNet MAC
This option is only available if the communication type ("Set Comm IF"
menu) for the device is BACNet and should only be configured by
qualified personnel. It allows users to program a specific MAC address
for the device.
Scroll to the Set MACNet MAC screen and press Enter to select.
• Use the Up or Down buttons to increase or decrease the value to
the desired address and press Enter to confirm.
The screen returns to the main menu option.
511838
11/07
* Menu *
Set Address
Set Address
1
* Menu *
Set BACNet MAC
Set BACNet MAC
1
IAQPoint User Manual
Honeywell
Using the IAQPoint
Programming Menus
23