Using The Iaqpoint Programming Menus - Honeywell IAQPoint Manuel D'utilisateur

Using the IAQPoint
Programming Menus

Using the IAQPoint Programming Menus

Access to the IAQPoint programming is
achieved through push buttons located on
the front of the device, below the LCD
screen. The right, or "Enter" button
(identified by a return symbol) opens
access to programming functions and
validates selections. The left and centre
buttons (identified by Down and Up arrows,
respectively) scroll through main
programming screens and increase or decrease values when in a
specific programming screen.
• Press the Enter button to access the programming menus.
• Use the Up and Down buttons to navigate through the menu
options and press the Enter button to select the desired option.
• Use the Up and Down buttons to modify a setting and press the
Enter button to confirm the change.
Since programming is password protected, you must login to gain
access to the menus (the default password is VA). In the Password
screen, the first letter is underlined, which indicates that it can be
modified.
• Press the Enter button to activate the login screen.
• Press the Up or Down button until the desired letter appears.
• Press the Enter button to validate the entry and move to the next
letter
• Press the Up or Down button until the desired letter appears
• Press the Enter button to validate the password and access the
menus.
20
All manuals and user guides at all-guides.com
Password
* AA *
IAQPoint User Manual
Honeywell
511838
11/07