Using The Iaqpoint; Programming Menus - Honeywell IAQPoint Manuel D'utilisateur

All manuals and user guides at all-guides.com

Using the IAQPoint

Programming Menus

When the IAQPoint is first powered up, it must go through a warm up
cycle, which could take as long as 15 minutes. During the warm up
cycle, the LCD screen displays the gas type and WARM-UP on the first
line and temperature and humidity readings (in real time) on the second
line.
When the device is in normal mode, it will display the gas type and
concentration on line one and temperature and humidity readings (in
real time) on the second line.
The programming menus provide access to a variety of function
screens. Each selection within the menu leads to another screen, in
sequence, until you have reached the end and can Quit the
programming functions.
511838
11/07
CO WARM-UP
2
%
º º
20 68 13
F RH
C
CO 1500 ppm
2
%
º º
20 68 13
C F RH
IAQPoint User Manual
Honeywell
Using the IAQPoint
Programming Menus
19