Panasonic WX-SR202DNP Mode D'emploi page 54

Pairing
■ Wired pairing
Pair a microphone to the receiver via a wired connection.
The wired connection uses a conversion cable (micro type B male to type A female; locally
procured) and a USB 2.0 cable (type A male to micro type B male; locally procured).
* Use a USB host (OTG) cable as conversion cable.
1
Remove the battery cover of the microphone
Refer to the microphone manual for further details.
2
Connect the microphone to the receiver
Connect the [SET] connector of the microphone to the [SET] connector of the receiver
via a USB 2.0 cable (type A male to micro type B male; locally procured) and a
conversion cable (micro type B male to type A female; locally procured).
When connecting the cables, make sure that the conversion cable is attached to the
receiver. If you connect the cables otherwise, you will not be able to pair the
microphone.
Read "Connecting with microphones" (page 36) for details on the connection
method.
3
Set the power switch on the microphone to ON
If the microphone is currently OFF, turn the power switch to ON. When the microphone
and the receiver are connected via cable, the microphone stops transmitting audio.
54
PUQX1039ZAV1_WX-SR202DNP_OI_en-fr.indb
WX-ST200P
Power indicator
Power switch
54
WX-ST400P
Power switch
2022/04/27 13:17:45