Panasonic WX-SR202DNP Mode D'emploi page 50

Settings
■ Microphone battery settings
Select the type of battery inside the microphone in use through the configuration switch
No.5.
Make sure to properly configure the battery type in order to correctly assess the remaining
battery level of the microphone (page 58).
Receiver
Configuration switches
Configuration switches numbers
No.5
OFF
ON
Important
● Changes in the configuration switches are applied during the start-up of
the receiver. If you have performed any changes while the receiver was
Important
ON, turn the power switch OFF and ON again to restart the product.
● The microphone battery type setting on the receiver applies to all
microphones paired with it, and cannot be changed individually.
● Read "Confirm the remaining battery level of the microphone" (page 58)
for more details on the remaining battery level indication.
50
PUQX1039ZAV1_WX-SR202DNP_OI_en-fr.indb
* The illustration shows WX-SR204DNP.
The switch cover is removed in this illustration.
Ni-MH battery (factory default)
Alkaline dry-cell battery
50
Microphone battery settings
2022/04/27 13:17:44