Panasonic WX-SR202DNP Mode D'emploi page 36

Connections
■ Connecting with microphones
Connect the [SET] connector of the microphone to the [SET] connector of the wireless
receiver via a USB 2.0 cable (type A male to micro type B male; locally procured) and a
conversion cable (micro type B male to type A female; locally procured).
This is necessary for the wired pairing of microphones to the receiver. Read "Wired
pairing" (page 54) for details.
When connecting the cables, make sure that the conversion cable is attached to the
wireless receiver. If you connect the cables otherwise, you will not be able to pair the
microphone.
Refer to the microphone manual for specifics on the [SET] connector on the microphone.
Receiver
Connector for
[SET]
Micro type B
Male
Conversion cable
(locally procured)
* Use a USB host (OTG) cable as
conversion cable.
36
PUQX1039ZAV1_WX-SR202DNP_OI_en-fr.indb
* The illustration shows WX-SR204DNP.
Type A Micro type B
Female Male
Type A
Male
USB 2.0 cable
(locally procured)
36
The switch cover is removed in this illustration.
WX-ST200P
or
WX-ST400P
Ｏ
1 Ｎ
2
Connector for
[SET]
2022/04/27 13:17:41