Panasonic WX-SR202DNP Mode D'emploi page 44

Settings
■ Antenna field selection
Set the wireless output level of the antennas through the configuration switches No.1 and
No.2, or alternatively set it individually by the configuration/maintenance PC. Choose the
most suitable wireless output level of the antenna (antenna field selection) according to the
usage environment.
Changing the antenna field selection to "Small / Medium / Large" will apply that setting to
all antennas connected to the receiver.
To change the settings for individual antennas, set the switch to [Individual setting] and
configure the field selection through a PC installed the support software.
Receiver
Configuration switches
Configuration
switches numbers
No.1 No.2
OFF OFF
OFF ON
ON OFF
ON ON
* These are the average ranges for antenna-microphone wireless coverage and intra-
antenna coverage between reference antennas for wireless synchronization. See
"Wireless synchronization settings" (page 46) for details.
● Changes in the configuration switches are applied during the start-up of
the receiver. If you have performed any changes while the receiver was
Important
ON, turn the power switch OFF and ON again to restart the product.
44
PUQX1039ZAV1_WX-SR202DNP_OI_en-fr.indb
Average wireless reach
Antenna field
(microphone-coverage
selection
area of the antenna)
Small Radius about 8 m (26 ft)
Medium
Radius about 15 m (49 ft) Radius about 40 m (131 ft)
(factory default)
Large Radius about 30 m (99 ft) Radius about 60 m (197 ft)
Individual
-
setting
44
* The illustration shows WX-SR204DNP.
The switch cover is removed in this illustration.
Average main system
reference antenna wireless
reach (coverage area)
*
Radius about 30 m (99 ft)
-
2022/04/27 13:17:43