Wall Tracks Installation - OVE JANIKE Manuel D'installation

1-4. Level the tracks (B) and mark the track holes' positions. 4 holes for each track.
5. Remove tracks and drill pilot holes in the marked locations with a ø1/4"(6mm) drill bit.
6-7. Insert the wall anchors (EE) using a rubber mallet until the wall anchors are flush with the wall. Replace
and secure the 2 tracks (B) with screws (DD), fittings (GG) and caps (HH). Do not overtighten.
1
B
3
Helpful Hint
Make sure there
is a support stud
located behind the
drywall, behind the
tracks!
5
ø1/4"
6mm

WALL TRACKS INSTALLATION

EE
6
GG
HH
DD
Helpful Hint
Do not overtighten!
This may crack the
wall panels.
9
2
B
4
7
EE
GG
HH
DD