OVE JANIKE Manuel D'installation page 11

1-3. Completely remove the support bar (F) and the fixed panels (C and K).
4. Remove the plastic gaskets from the support bracket (R) and the guide (Q). Drill pilot holes with a ø1/8" (3mm) drill
bit.
5-6. Fix the bracket (R) and the guide (Q) with screw (CC), then put the plastic gaskets back. Cover the screw of the
guide (Q) with the clip (JJ).
7. Replace the fixed panels (C and K) into the 2 wall tracks (B).
Note: The wall tracks (B) allow you to adjust the position of the fixed panels (C and K). Adjusting the depth
and/or giving the fixed panel a slight angle allows for precise alignment with the door.
8-9. Replace the fixed panels (C and K) into the support bracket (R) and the guide (Q).
1
G
K
3
B
B
K C
5
CC
R
7
B B
K C
FIXED PANELS INSTALLATION
F
Helpful Hint
For steps 5 &
6, add a drop of
silicone in the hole
before screwing.
8
C
R
11
2
F
G
C
4
ø1/8"
3mm
Q
R
6
JJ
CC
Q
9
K
Q