Error Messages - Pioneer SUPER TUNER III D DVH-P5000MP Mode D'emploi

Masquer les pouces Voir aussi pour SUPER TUNER III D DVH-P5000MP:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Additional Information
Problems during Video CD playback
Symptom
The PBC (playback control)
menu display cannot be called
up.
Repeat play and track/time
search are not possible.

Error messages

When problems occur with disc playback, an error message appears on the display. Refer to the
table below to identify the problem, then take the suggested corrective action. If the error persists,
contact your dealer or your nearest PIONEER Service Center.
Error messages
Message
ERROR-02
TEMP
ERROR-10
NON PLAY
ERROR-05
Error messages on the display
Message
ERROR-02
THERMAL PROTECTION IN
MOTION
DIFFERENT REGION DISC
NON-PLAYABLE DISC
Cause
The Video CD playing does not fea-
ture PBC.
PBC is turned off.
PBC is turned on.
Cause
Dirty disc
Scratched disc
The temperature of this unit is out-
side of the normal operating range
The disc does not have the same re-
gion number as this unit
This type of disc cannot be played
by this unit
The disc is loaded upside down
Electrical or mechanical
Cause
Dirty disc
Scratched disc
The temperature of this unit is out-
side of the normal operating range
The disc does not have the same re-
gion number as this unit
This type of disc cannot be played
by this unit
The disc is loaded upside down
Action (See)
This operation is not possible with Video CDs
not featuring PBC.
Turn PBC on. (Page 30, Page 32)
Turn PBC off. (Page 30, Page 32)
Action (See)
Clean disc.
Replace disc.
Wait until the units temperature returns to
within normal operating limits.
Replace the DVD video with one bearing the
correct region number.
Replace the disc with one this unit can play.
Check that the disc is loaded correctly.
Turn the ignition ON and OFF, or switch to a
different source, then back to the DVD player.
Action (See)
Clean disc.
Replace disc.
Wait until the units temperature returns to
within normal operating limits.
Replace the DVD video with one bearing the
correct region number.
Replace the disc with one this unit can play.
Check that the disc is loaded correctly.
Appendix
83
En

Publicité

Table des Matières
loading

Table des Matières