Pioneer SUPER TUNER III D DVH-P5000MP Mode D'emploi page 69

Digital Signal Processor
4 Press n and then press r or q to
select the equalizer band to be adjusted.
Each press of r or q selects equalizer
bands in the following order:
LOW (low)MID (mid)HI (high)
5 Press n and then press r or q to
select the center frequency of selected
band.
Each press of r or q selects the frequency
in the following order:
100125160200250315400
5006308001K1.2K1.6K2K
2.5K3.1K4K5K6.3K8K (Hz)
6 Press n and then press r or q to
adjust the equalizer level.
Each press of r or q increases or de-
creases the equalizer level. +6  6 is dis-
played as the level is increased or decreased.
7 Press n and then press r or q to
select the desired Q factor.
Each press r or q switches between the
following Q factor:
WID (wide)NAR (narrow)
# You can adjust parameters for each band of
the other speakers in the same way.
8 Press BAND to return to the playback
display.
Note
You can select a center frequency from among 20
frequencies for each band. You can change the
center frequency in 1/3-octave steps, but you can-
not select frequencies that have intervals shorter
than 1 octave among the center frequencies of
the three bands.
Section
12
69
En