Connect To A Remote Mailbox - Nokia E Serie Mode D'emploi

Before starting to set up Mail for Exchange, ensure that you
have the following:
• A corporate e-mail ID
• Your office network user name
• Your office network password
• Your network domain name (contact your company's IT
department)
• Your Mail for Exchange server name (contact your
company's IT department)
Depending on your company's Mail for Exchange server
configuration, you may need to enter other information in
addition to those listed. If you do not know the correct
information, contact your company's IT department.
With Mail for Exchange, the use of the lock code may be
mandatory. The default lock code of your device is 12345, but
your company's IT administrator may have set a different one
for you to use.
You can access and modify the Mail for Exchange profile and
settings in the Messaging settings.
Regular POP or IMAP e-mail
Your device can download e-mails from a POP or IMAP e-mail
account.
POP3 is a version of the post office protocol that is used to
store and retrieve e-mail or internet mail messages from a
server. IMAP4 is a version of the internet message access
protocol that lets you access and manage e-mail messages
www.nokia.com/support
Cyan Cyan
while the messages are still on the e-mail server. You can then
choose which messages to download to your device.
Set up POP or IMAP e-mail
1. Go to the home screen, scroll to the e-mail wizard, and
press the scroll key.
2. Select Start e-mail setup.
3. Read the information on the display, and select Start.
4. Select Yes to allow your device to access the network.
5. Enter your e-mail address and password.
6. Read the information on the display, and select
finalize e-mail setup. The name of your new mailbox
replaces Mailbox in the Messaging main view.
Tip: After you have set up a POP or IMAP e-mail, in the
Messaging main view, select
E-mail and the mailbox to edit the settings, for
example a possible signature, or the name of your
mailbox.

Connect to a remote mailbox

E-mail addressed to you is not automatically received by your
device, but by your remote mailbox. To read your e-mail, you
must first connect to the remote mailbox; then select the e-
mail messages you wish to retrieve into your device.
1. To retrieve received e-mail messages to your device and
view them, select your mailbox in the Messaging main
view. When the device asks
Yes.
2. Enter your user name and password, if prompted.
Magenta Magenta Yellow Yellow Black Black
OK to
Options Settings
> >
Connect to mailbox?, select
39