Nokia E Serie Mode D'emploi page 46

Access point name — Enter the name for the access
•
point. The name is usually provided by your service
provider.
User name — Enter your user name if required by the
•
service provider. User names are often case-sensitive
and provided by your service provider.
Prompt password — Select Yes to enter your
•
password each time you log into a server or
the password in your device memory and automate
the login.
Password — Enter your password if required by the
•
service provider. The password is often case-sensitive
and provided by the service provider.
Authentication — Select Secure
•
password always encrypted, orNormal
password encrypted when possible.
Homepage — Enter the web address of the page you
•
want to display as the home page when you use this
access point.
4. After defining the settings, select Options
settings to define the advanced settings or
the settings and exit.
Set up an access point for WLAN
manually
1. Select Menu Tools Settings
> > >
Access points.
2. Select Options New access point
>
access point, or select an existing access point from the
46
Cyan Cyan
list and then Options
the access point as a basis for the new one.
3. Define the following settings.
Connection name
•
connection.
Data bearer
•
WLAN network name
•
No to save
identifier (SSID), that is, the name that identifies the
specific WLAN, select
network from the WLANs in range, select
networks.
Network status
•
are connecting to is hidden or
to send your
WLAN network mode
•
to send your
Infrastructure, devices can communicate with each
other and with wired LAN devices through a WLAN
access point. If you select Ad-hoc, devices can send and
receive data directly with each other, and no WLAN
access point is needed.
Advanced
>
WLAN security mode
•
Back to save
security mode that is used in the WLAN access point. If
you select WEP (wired equivalent privacy), 802.1x or
WPA/WPA2 (Wi-Fi protected access), you must also
configure the relevant additional settings.
WLAN security settings
•
for the selected security mode.
Homepage
•
Connection
> want to display as the home page when you use this
access point.
to create a new
To set up a WLAN access point automatically, use the WLAN
wizard. Select Menu
Magenta Magenta Yellow Yellow Black Black
Duplicate access point to use
>
— Enter a descriptive name for the
— Select Wireless LAN.
— To enter the service set
Enter manually. To select the
Search for
— Select Hidden if the network you
Public if it is not hidden.
— If you select
— You must select the same
— Edit the security settings
— Enter the web address of the page you
Connectivity WLAN wiz..
> >
www.nokia.com/support