Barcode Reader - Nokia E Serie Mode D'emploi

Use a VPN connection in an
application
You may have to prove your identity when you log on to the
enterprise network. Contact your company's IT department
for the credentials.
To use a VPN connection in an application, the application
must be associated with a VPN access point.
Tip: You can configure the application's connection
setting to Always ask, in which case you select the VPN
access point from a list of connections when a
connection is established.
1. In the application in which you want to create a VPN
connection, select a VPN access point as the access point.
2. If you are using legacy authentication, enter your VPN
user name and passcode or password. If the SecurID token
has become out of synchronization with the clock of the
ACE/Server, enter the next passcode. If you are using
certificate-based authentication, you may have to enter
the key store password.

Barcode reader

Select Menu Tools > Barcode.
>
Use the Barcode reader application to decode barcodes. The
codes may contain information such as URL links, e-mail
addresses, phone numbers, and business cards. The Barcode
reader does not support 1D codes. The Barcode reader uses
the camera in your device to scan codes.
78
Cyan Cyan
To scan a code, select Scan
in the viewfinder, the decoded information appears on the
display. To scan a code that is located at some distance from
your device, deactivate the close-up mode by selecting
Options Deactiv. close-up
>
To save the scanned data, select
is saved in the BCR file format.
To save scanned data to Contacts, select
Contacts or Save business
are saving. If the data you scanned includes a mobile phone
number or an e-mail address, you can call or send a message
to the number or send an e-mail to the address by selecting
Options Call or Options
>
you scanned includes a URL link, you can open it by selecting
Options Open link.
>
To view previously saved, decoded information, select
data in the main view.
Magenta Magenta Yellow Yellow Black Black
code. After a valid code is detected
mode.
Options > Save. The data
Options Add to
>
card, depending on the data you
Create message:. If the data
>
Saved
www.nokia.com/support