Transfer Content Between Devices; Display Indicators - Nokia E Serie Mode D'emploi

The necessary steps for data transfer may vary depending on
your device, and whether you have interrupted data transfer
earlier. The items that you can transfer vary depending on
the other device.
Transfer content between
devices
To connect the two devices, follow the instructions on the
display. For some device models, the Switch application is
sent to the other device as a message. To install Switch on
the other device, open the message and follow the
instructions on the display. On your new Eseries device, select
the content you want to copy from the other device.
After the data transfer, you can save the shortcut with the
transfer settings to the main view to repeat the same transfer
later. To edit the shortcut, select Options
settings.

Display indicators

The device is being used in a UMTS network (network
service).
The battery charge level. The higher the bar, the
stronger the charge in the battery.
You have one or more unread messages in the Inbox
folder in Messaging.
18
Cyan Cyan
You have received new e-mail in the remote
mailbox.
There are messages waiting to be sent in the Outbox
folder in Messaging.
You have one or more missed phone calls.
The keys of the device are locked.
An alarm is active.
You have activated the Silent profile, and the device
does not ring for an incoming call or message.
Bluetooth is active.
Shortcut
>
Data is being transmitted using Bluetooth
connectivity. When the indicator is blinking, your
device is trying to connect with another device.
An infrared connection is active. When the indicator
is blinking, your device is trying to connect with
another device, or the connection has been lost.
A GPRS packet data connection is available (network
service). If the icon is
the icon is
Magenta Magenta Yellow Yellow Black Black
, the connection is active. If
, the connection is on hold.
www.nokia.com/support