Assigning A Comment To The Lan Docking Station; Upgrading The Lan Docking Station Firmware - Philips LFH9160 Manuel De L'utilisateur

4.9 Assigning a comment to the LAN
Docking Station
You can assign comments to each LAN Docking
Station. Assigning comments is not required, but
it can help you identify individual LAN Docking
Stations within your organization.
Enter the name of the office (where the
1
LAN Docking Station is installed) along
with a comment in the the comments panel.
This will help you identify this LAN Docking
Station.
Press the
2
SUBMIT
the comments panel to save your changes.
D Note
The ROOM field is limited to 128 characters;
the COMMENT field is limited to 255
characters.
16
All manuals and user guides at all-guides.com
button at the bottom of
4.10 Upgrading the LAN Docking Station
firmware
Occasionally Philips may release new versions
of the firmware with bug fixes and feature
improvements. Visit the support center at
philips.com/dictation
version is available for the LAN Docking Station.
The current version of the firmware is displayed
at the top of the configuration interface on the
STATUS panel.
Download the latest firmware (.bcd file)
1
from www.philips.com/dictation.
Save the .bcd file to to a network location
2
that the LAN Docking Station can access.
This can be either an FTP server or an
HTTP Web server.
Open the LAN Docking Station
3
configuration interface by entering its IP
address in your Web browser or using the
LAN Docking Station Administration
Select the type of server (FTP, SFTP, HTTP)
4
where you have saved the .bcd file.
Enter the domain name or IP address of
5
the server hosting the firmware file into
the
field (the server does not have
SERVER
to be on your Local Area Network). If you
reference the server using its domain name,
make sure that at least one DNS server is
configured (see Assigning a static IP address
on page 14) or that you are using DHCP
(see Assigning an IP address from DHCP
page 13).
Enter the port number of your server
6
into the field. Unless your server
PORT
is configured to use nonstandard port
to check if a new firmware
Tool.
User manual
www.
on