Changing The Lan Docking Station Administrator Password - Philips LFH9160 Manuel De L'utilisateur

Important
C
When assigning a static IP address to the LAN
Docking Station, make sure that the address
you assign is available on your network. If the
IP address is already in use on your network,
the configuration interface of the LAN Docking
Station will not be accessible. You can resolve
this situation by freeing up the IP address on
the network and powering the LAN Docking
Station off then back on, or by resetting the
LAN Docking Station to factory default settings.
See Resetting to factory defaults on page 17 for
more information.
4.8 Changing the LAN Docking Station
administrator password
To access the configuration interface of the LAN
Docking Station, you must enter a password.
The factory default password is ‚administrator'.
The administration password protects the
settings of the LAN Docking Station against
unauthorized access. It is highly recommended
that you change the default password when you
first log on to the configuration interface.
Type the new password into the
1
ADMINISTRATOR PASSWORD
password settings panel.
Confirm the password by typing it again into
2
the
CONFIRM PASSWORD
Press the
3
SUBMIT
the password settings panel.
User manual
All manuals and user guides at all-guides.com
field on the
field.
button at the bottom of
D Note
If the password and the confirmation do not
match, you will get an error pop-up message
after pressing the
SUBMIT
happens, start over from step 1.
Important
C
When you access the configuration interface
of the LAN Docking Station, your password is
sent over the network in clear text format. Do
not use your domain administrator password
or any existing network password for the LAN
Docking Station.
E Tip
If you have several LAN Docking Stations in
your network, it is advisable to use the same
administrator password for each. This makes
it easier to access them from the
Station Administration Tool
button. If this
LAN Docking
(see page 18).
15