Changing The Ip Address Of The Lan Docking Station - Philips LFH9160 Manuel De L'utilisateur

4.7 Changing the IP address of the LAN
Docking Station
You can assign a static IP address to the LAN
Docking Station or have the LAN Docking
station use the DHCP service on your network
to obtain an IP address automatically.
4.7.1 Assigning an IP address from DHCP
D Note
If you are installing the LAN Docking Station for
the first time, please follow the instructions in
the chapter Installation
To have the LAN Docking Station obtain an IP
address automatically from the DHCP server on
your network, follow these steps:
Make a note of the MAC address of the
1
LAN Docking Station. The MAC address can
be found on the bottom plate of the LAN
Docking Station.
Configure your DHCP server to assign an IP
2
User manual
All manuals and user guides at all-guides.com
on page 7.
address to the LAN Docking Station based
on the MAC address of the LAN Docking
Station. Refer to the documentation of your
DHCP server for more information.
Open the LAN Docking Station
3
configuration interface by entering its IP
address in your Web browser or using the
LAN Docking Station Administration
Check the
4
OBTAIN IP ADDRESS
AUTOMATICALLY (DHCP)
IP Settings panel.
Click the
5
SUBMIT
the IP settings panel in order to save your
changes. The LAN Docking Station will
obtain an IP address from the DHCP server
immediately and every time it is powered on.
D Note
The IP address of the LAN Docking Station
is updated immediately, so its configuration
interface will no longer be accessible from the
old IP address.
Tool.
check box on the
button at the bottom of
13