Assigning A Comment To The Lan Docking Station; 3.10 Upgrading The Lan Docking Station Firmware - Philips LFH 9160 Manuel De L'utilisateur

Masquer les pouces Voir aussi pour LFH 9160:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 57
3.9

Assigning a comment to the LAN Docking Station

You can assign comments to each LAN Docking Station. Assigning comments is not required, but
it can help you identify individual LAN Docking Stations within your organization.
Enter the name of the office (where the LAN
1
Docking Station is installed) along with a
comment in the the comments panel. This will
help you identify this LAN Docking Station.
Press the
SUBMIT
2
the comments panel to save your changes.
D Note: The ROOM field is limited to 128
characters; the COMMENT field is limited to
255 characters.

3.10 Upgrading the LAN Docking Station firmware

Occasionally Philips may release new versions of the firmware with bug fixes and feature
improvements. Visit the support center at
version is available for the LAN Docking Station. The current version of the firmware is displayed
at the top of the configuration interface on the STATUS panel.
Download the latest firmware (.bcd file) from www.philips.com/dictation.
1
Save the .bcd file to to a network location that the LAN Docking Station can access. This can
2
be either an FTP server or an HTTP Web server.
Open the LAN Docking Station configuration interface by entering its IP address in your
3
Web browser or using the
Select the type of server (FTP, SFTP, HTTP) where you have saved the .bcd file.
4
Enter the domain name or IP address of the server hosting the firmware file into the
5
field (the server does not have to be on your Local Area Network). If you reference the
server using its domain name, make sure that at least one DNS server is configured (see
Assigning a static IP address
from DHCP
on page 13).
Enter the port number of your server into the
6
to use nonstandard port numbers, you should use 21 for an FTP server, 22 for an SFTP
connection and 80 for an HTTP Web server.
1
button at the bottom of
www.philips.com/dictation
LAN Docking Station Administration
on page 14) or that you are using DHCP (see
to check if a new firmware
Tool.
PORT
field. Unless your server is configured
SERVER
Assigning an IP address
User manual

Publicité

Table des Matières
loading

Table des Matières